Networking Your Ipad And Computer - PRESONUS StudioLive 16.0.2 Owner's Manual

Presonus studiolive 16.0.2 digital mixer
Hide thumbs Also See for StudioLive 16.0.2:
Table of Contents

Advertisement

Owner's Manual

Networking your iPad and Computer

7.3.1
STEP 1: Creating an Ad Hoc network on your computer
Software: Universal Control, SL Remote, Capture, and Studio One Artist 7
To use StudioLive Remote, you must first install Universal Control on, and
sync your StudioLive to, a Windows or Apple computer that has both
a FireWire connection and a wireless card. Once you have connected
and synced your StudioLive to VSL on your computer, the next step is to
create an ad hoc wireless network between your iPad and your computer.
An ad hoc, or "peer-to-peer, " network is a very simple network
involving at least two systems: in this case, the computer to which
your StudioLive is connected and an Apple iPad. Unlike the usual local
area network (LAN) that you use to connect multiple computers to
the Internet or to a shared file server, no server or router is needed.
Creating an ad hoc wireless network between your computer and your
iPad is quick and easy. The network will allow you to remote-control VSL,
and hence your StudioLive, from an iPad, using StudioLive Remote.
Windows XP
1. Open Start>Control Panel.
2. Click Network and Internet Connections.
3. Select Network Connections.
4. Right-click your wireless network connection and then click Properties.
5. Click the Wireless Networks tab in the Wireless
Network Connection Properties dialog box.
6. Under Preferred Networks on the Wireless Networks tab, click Add.
7. On the Association tab, type the name of your ad hoc
wireless network in Network name (SSID) box. For example,
you could name your wireless network "StudioLive. "
8. Uncheck "The key is provided for me automatically. "
9. Check "This is a computer-to-computer (ad hoc) network. "
10. Create a password and type it in both the Network Key and
Confirm Network Key boxes. For the best security, include
letters, numbers, and punctuation. Then click "OK. "
11. Click "OK" again to save your changes.
Using StudioLive Remote for iPad
7.3
79 79

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents