PRESONUS StudioLive 16.0.2 Owner's Manual page 87

Owner's Manual
STEP 2:
Troubleshooting your Ad Hoc Network
Software: Universal Control, SL Remote, Capture, and Studio One Artist 7
Connect your iPad to your Ad Hoc Network
1. Tap on the Settings icon in your iPad.
2. Tap on "Network. "
3. Tap on "Wi-Fi. "
4. Under "Choose a Network, " you should now see your ad
5. Tap on your newly created network to select it.
6. If you secured your network with a password,
7. Tap on the menu arrow to the right of your
8. Turn Auto-Join to "On. "
9. You are now ready to launch StudioLive Remote and mix on the go!
Every once in a while, your iPad will accept an ad hoc
network even though that network is not usable. When this
happens, you will see the Wi-Fi icon in the top status bar on
your iPad but you will not see your StudioLive in the Devices
list in SL Remote. Here's what to do if this happens:
1. Tap on the Settings icon in your iPhone main menu.
2. Click on "Wi-Fi. "
3. Make sure a check mark is visible before your ad hoc network name.
4. Click on the arrow next to your ad hoc network name.
5. The IP address should begin with 169.254.xxx.xxx.
6. If there is no IP (the field is blank), that's why
StudioLive Remote can't connect.
7. Wait about 60 seconds on that screen and a new IP (like
169.254.xxx.xxx) will be assigned automatically.
8. If no IP appears, click "choose Static, " then enter:
Using StudioLive Remote for iPad
hoc network in the list.
you will prompted to enter it.
network name to open its network settings.
IP Address 169.254.1.2
Subnet Mask 255.255.255.255
7.3
81 81