PRESONUS StudioLive 16.0.2 Owner's Manual page 59

Owner's Manual
Trying Out Presets
Using MIDI Control Mode to Remote-Control StudioLive
3. Press the Up pedal to confirm.
4. Press Pedal 6 so that the red LED is flashing.
5. Press the Up pedal to assign the Control Change.
6. Using Expression Pedal A, select CC 64.
7. Press the Up pedal twice to confirm.
8. Press Pedal 8 so that its red LED is flashing.
9. Press the Up pedal to make the Control Change assignment.
10. Using Expression Pedal A, select CC 42.
11. Press the Up pedal once to select the lowest value.
12. Move Expression Pedal A to its lowest position to select 00.
13. Press the Up pedal once to select the highest value.
14. Move Expression Pedal A to its highest position to select 127.
15. Press the Up pedal once to confirm.
16. Press and hold the Down pedal to exit.
Preset 1 recalls Scene 2 on your StudioLive.
•
• Preset 3 recalls "F20: High Ceilings" on FXA on your StudioLive.
• Preset 6 allows you to control the Main bus assignment for FXA
(effectively muting and unmuting the effect in the Mains) from
Pedal 6 on your FCB1010. You also can control the Main output
volume for your StudioLive using Expression Pedal A.
Scenes, Presets, System Menu, and MIDI Control 5
5.5
53 53