PRESONUS StudioLive 16.0.2 Owner's Manual page 96

7 Software: Universal Control, SL Remote, Capture, and Studio One Artist
7.3 Using StudioLive Remote for iPad
Zooming In
Zooming Out
Overview Map
POWER USER TIP: The Overview Map always follows your current position. So if you
scroll left or right while you are zoomed in, the Overview Map will scroll with you.
Draw Tool
GEQ Assignment
90 90
Zooms view in to make fine adjustments.
Press the "+" button to zoom in on the GEQ View. Slide your finger to the
left or right to access additional bands.
Use the Overview Map in the bottom right corner of the GEQ
page to reference your current position within the 31-bands.
Zooms view out to make fine adjustments.
Press the "-" button to zoom out the GEQ View. If you have not zoomed all
the way out (so that you don't have all 31 bands on your screen), you can
slide your finger to the left or right to access additional bands.
Use the Overview Map in the bottom right corner of the GEQ
page to reference your current position within the 31 bands.
Provides a reference point for the current bands in view.
All this zooming in and out provides the ultimate control when making
GEQ adjustments but makes it easy to get lost and forget which bands in
the GEQ you're adjusting. This is where the Overview Map comes in.
The Overview Map is located in the bottom right corner of the
GEQ page. Whether you've zoomed in on a few bands or zoomed
all the way out so that you can see all 31 bands on your iPad,
the Overview Map will highlight which bands are currently in
view and where they are in reference to the rest of the GEQ.
Allows you to draw the EQ curve with your finger.
SL Remote provides flexible control over your graphic EQ settings. You
can control each band individually or several bands at once via the sliders
or you can simply draw in your own EQ curve and fine tune from there.
To enable EQ Curve Drawing, tap the Draw button and slide your
finger over the graphic EQ bands to begin drawing your curve.
Each band's slider will snap to your finger as you pass over it.
Inserts each GEQ on an Aux, Subgroup, or Main bus output pair. (StudioLive 24.4.2
only)
Just like VSL and the StudioLive 24.4.2, SL Remote allows you to choose
onto which output pair you'd like to insert each graphic EQ. To change an
assignment, simply tap on the Assign menu, and then choose the output
pair by tapping it.
StudioLive 16.4.2 users: each of your graphic EQs is
already assigned to either your Main output or one of
your Auxes. These assignments cannot be changed.
StudioLive 16.0.2 users have a graphic EQ available for the Main bus only.
PreSonus StudioLive 16.0.2
™