Digital Effects | Master Control; The Digital Fx (Effects) Menu - PRESONUS StudioLive 16.0.2 Owner's Manual

4 Controls
4.8

Digital Effects | Master Control

Digital Effects | Master Control
4.8

The Digital FX (Effects) Menu

4.8.1
36 36 36
From the Digital Effects | Master Control section, you can select and change the
parameters of the two internal effects processors, and you can store and recall every
setting on your StudioLive. (See Section 5, "Scenes, Presets, and System Menu. " )
Because almost all of the StudioLive's features are controlled from the mixing
surface (rather than using menus and submenus), you will mainly use this section
to adjust the internal effects processors and to save and recall presets and Scenes.
The StudioLive features two internal effects processors. Each processor can access the
StudioLive's selection of high-quality reverbs and delays. As described in Section 8.4,
each of these effects can be routed to any of the subgroups, the Aux bus, or the main
outputs. To access the effects library and make adjustments to effect parameters,
press the FX button in the Master Control section.
The Next button will scroll through this screen in the following order: FX A library
selection, FX A main parameter, FX B library selection, FX B main parameter. When
choosing your effects preset, use the Value encoder to scroll through the library.
When you have arrived at your selection, press the Recall button to load it.
PreSonus StudioLive
The first page of the FX menu is the QuickView screen.
It displays both of the effects assigned to the internal
effects buses, the main parameter for each, and to
which Aux buses the effect is being routed. Effect A is
assigned to EFX A bus, and Effect B is assigned to EFX
B bus. Use the Next and Prev buttons to navigate
through the screen. To change a parameter, use the
Value encoder directly beneath the LCD screen.
The color will invert for each parameter
when it is selected for modification.
16.0.2
™