Owner's Manual
7.2.2 VSL: Overview Tab
SOFTWARE —Universal Control, Capture and StudioLive Artist
At the top of the VSL window, you will see three tabs: Overview, Channel, and
Setup. The Overview tab provides you with a complete graphical representation of
your StudioLive. As you adjust parameters on the StudioLive, you will notice that
the VSL overview is also updated. If you use your mouse to adjust a parameter in
VSL, the StudioLive will be updated remotely. It is important to remember that
every button, knob, slider, and fader on the VSL corresponds directly to a button,
knob, slider, or fader on your StudioLive. The graphic below identifies shows each
controller labels with its corresponding control on the StudioLive.VSL Channel Tab
7
VSL: Virtual StudioLive 7.2
79