PRESONUS StudioLive 16.0.2 Owner's Manual page 91

Owner's Manual
Channel Controls: Pan
POWER USER TIP: The Pan control supports off-axis movement. Once you
have pressed a pan field to select it, you can slide your finger anywhere in the
screen and make a side-to-side movement to control the pan position.
Channel Controls: Mute Controls:
Mute
Channel Controls:
Fader and Metering
POWER USER TIP: The fader supports off-axis movement. Once you
have touched a fader to select it, you can slide your finger anywhere in
the screen and make a up/down movement to control the fader.
Masters Overview
Masters Section Page
Software: Universal Control, SL Remote, Capture, and Studio One Artist 7
Controls the panning for each channel.
To pan a channel, tap and hold anywhere on the Pan control and then
slide your finger right or left while maintaining constant contact with the
iPad screen. These controls correspond directly to those in VSL and on the
StudioLive.
The pan position is displayed in the Channel Select field.
Controls the mute for each channel.
To Mute a channel, tap its Mute button. The Mute button will turn red,
indicating that the channel has been muted.
Controls the level for each channel and displays each channel's metering.
To control the volume of a channel, tap the fader and move your finger up
or down, while maintaining constant contact with the iPad screen.
The fader position is displayed in the Channel Select field.
As with VSL, the fader position set in StudioLive Remote is the level
that you will hear. To sync the physical faders on your StudioLive
with StudioLive Remote, press the Locate button on your mixer.
While in Locate mode, the physical faders on your StudioLive will not
be active, so you can adjust them without any changes in level.
To the left of the fader, the user will see the meter for the channel. The
meter will follow the meter mode selected on the StudioLive or from VSL.
Meter mode cannot be changed from SL Remote.
Displays the metering for the Main bus, Auxes (16.0.2) and Subgroups (16.4.2 and
24.4.2).
Tap to open the Masters Section page.
In the upper right-hand corner of every page in StudioLive Remote
(Overview, Aux Mixer, and Graphic EQ), you will find the Masters
Overview. This displays the metering for the Main bus.
Tapping on the Masters Overview will
open the Masters Section Page.
Using StudioLive Remote for iPad 7.3
85 85