PRESONUS StudioLive 16.0.2 Owner's Manual page 41

Owner's Manual
Monitor Output
Level Control
FireWire Monitor Button
Solo Bus
Monitor Button
• Auditioning an Aux-send monitor mix
• Dialing in the dynamics processing and EQ on a subgroup
• Creating a better blend for instrumental sections (horns, strings, etc.)
Main Mix
Monitor Button
Power User Tip: By summing the Main mix and the Solo bus, you can raise the volume of the
channel you're tweaking without affecting the mix the audience is hearing. To do this, enable
both the Main mix and the Solo bus in your monitors. Solo the channels you need to work
on and raise the Solo Output level so that the channels are louder than the Main mix.
Adjusts the Overall Level of the Monitor Output.
This knob adjusts the overall level of the control-room monitor outputs.
Assigns FireWire Returns 1 and 2 to the Monitor Bus.
The FireWire Monitor button patches FireWire returns 1 and 2 to the monitor bus. The
level for this input is controlled by the level set from the computer application (such
as Studio One Artist) that is playing the audio.
Assigns the Solo Bus to the Monitor Outputs.
The Solo Bus Monitor button patches any soloed channel or Aux send to the Monitor
bus. This can be useful in any number of ways. For example:
Assigns the Main Mix to the Monitor Bus.
The Main Mix Monitor button routes the same signal that is being sent from the main
outputs to the Monitor bus. This signal is always pre-fader.
Controls 4
Master Section 4.7
35 35 35