PRESONUS StudioLive 16.0.2 Owner's Manual page 61

Owner's Manual
Creating a New Patch on the Roland FC-300
Instant Scene Recall
Using MIDI Control Mode to Remote-Control StudioLive
Before setting up your FC-300, you must set up your StudioLive for
this example. Navigate to Pages 4 and 5 of your StudioLive system
menu and set each page up as shown in these images:
Now that your StudioLive is set up to communicate with your Roland FC-300, you will
need to create a new patch. Remember you must follow all of the steps in this tutorial
to control your StudioLive as previously described. At the end of this tutorial, we'll
discuss how to name and save your new patch so you can use it again in the future.
1. Press the Mode button until the Patch Mode LED is illuminated.
2. Making sure the red LED is illuminated on the first row
of pedals, depress Pedal 1/6. Press the right Parameter
button. The LCD will display "PATCH: On MIDI. "
3. Press the Write button so that the LCD displays "Edit MIDI. "
4. Press the Write button again. You will see "001: ----- -----. "
5. Press the right Parameter button.
6. Press the Value Up button so that the LCD displays "001:PC CH#01 PC#001. "
7. The first field defaults to Program Change ("PC"). This is how the
StudioLive recalls Scenes, so you can leave this field as it is.
8. Use the right Parameter button to move to the
next field: MIDI channel number.
9. Set the MIDI channel to 1.
10. Use the right Parameter button to move to the next field: Program Change
number. The number you enter will determine which Scene will be recalled.
11. Use the Value Up button to set the Program Change number to 002.
12. Press the Exit button twice and continue to FXA Preset Recall.
Scenes, Presets, System Menu, and MIDI Control 5
5.5
55 55