PRESONUS StudioLive 16.0.2 Owner's Manual page 62

5 Scenes, Presets, System Menu, and MIDI Control
5.5 Using MIDI Control Mode to Remote-Control StudioLive
FXA Preset Recall
FXA Assign/Unassign to Mains
56 56
1. Next we will set CTL Pedal 1 to recall a preset on FXA. Press the
right Parameter button until the LCD displays "CTL1: On MIDI. "
2. Press the Write button so that the LCD displays "Edit MIDI. "
3. Press the Write button again. You will see "001: ----- -----. "
4. Press the right Parameter button.
5. Press the Value Up button so that the LCD displays "001:PC CH#01 PC#001. "
6. The first field defaults to Program Change ("PC"). This is how the
StudioLive recalls FX presets, so you can leave this field as it is.
7. Use the right Parameter button to move to the
next field: MIDI channel number.
8. Set the MIDI channel to 2.
9. Use the right Parameter button to move to the next
field: Program Change number. The number you enter
will determine which FX Preset will be recalled.
10. Use the Value Up button to set the Program Change number to 10.
11. Press the Exit button twice and continue to FXA Assign/Unassign to Mains.
Next, we will set CTL Pedal 2 to control the Main assignment ("mute") for FXA.
1. Press the right Parameter button until the LCD reads "CTL2: Assign. "
2. The curser should be on the CH# Tx field. Press the Value
Down button until the MIDI channel value is "04. "
3. Use the right Parameter button to navigate to the CC# field.
4. Use the Value Up and Down buttons to set the Control Change number to 64.
5. Continue to FXA and Main Bus Output Levels.
PreSonus StudioLive 16.0.2
™