The Virtual Control Freak; Control Freak - Kenton Control Freak STUDIO EDITION User Manual

CONTROL FREAK

The Virtual Control Freak

This shows the startup screen.
Select a slider or button.
A sub-menu window down drops
where you can set up the parameters
for that button or slider.
Read the 'readme' file that comes with
the program for setting the program
up to receive and send data to and
from the Virtual Control Freak.
The virtual Control Freak is a freeware program that allows the user to set up
or edit a profile without using the Freak. This is useful as you can then save
and edit till you are happy with it before you send it to your Freak.
At the moment it is only an 8 slider program but the 16 slider version will be
released soon.You can download this program from:
http://www.dheard.dial.pipex.com
This program saves as a MIDI file so you use your sequencer as you did earlier
in the manual for SysEx dumping and receiving to and from your sequencer.
THE VIRTUAL CONTROL FREAK
47