Kenton Control Freak STUDIO EDITION User Manual page 31

CONTROL FREAK
Press the [–– >] key – the display will show:
Turn the Data Wheel to the right (clockwise) until the display shows:
Press the [–– >] key – the display will show:
Turn the Data Wheel one click to to the left – the display will show:
Press the [–– >] key – the display will show:
Press the [STORE] key to save your data
Press the [EXIT] key to go back to PLAY MODE
At this point you have set the button so that it turns the chord on when pressed.
To make it turn the notes off again when released continue as follows:
Press the [–– >] key from home position to start edit and display the edit menu options.
Turn the Data Wheel to the right (clockwise) until the display shows:
Press the [–– >] key – Button to Edit should still be the correct one
Press the [–– >] key – leave Minimum Levl at 0
Press the [–– >] key – leave Maximum Levl at 127
Press the [–– >] key – the display will show:
Turn the Data Wheel one click to the right - the display will show:
Press the [–– >] key – the display will show:
Turn the Data Wheel four clicks to the right - the display will show:
Press the [–– >] key – the display will show:
Turn the Data Wheel to the right (clockwise) until the display shows:
Press the [–– >] key – the display will show;
Turn the Data Wheel one click to to the left - the display will show:
Press the [–– >] key – the display will show:
Turn the Data Wheel four clicks to the right - the display will show:
Press the [–– >] key – the display will show:
EDITING EXAMPLES
```Note`Number
Data`Val`00h```0
Data`Val`43h``67
````Velocity````
Data`Val`00h```0
Data`from`Slider
````COMMAND
``End`of`DATA
EDIT`PB`OFF`DATA
``Header``Data
`Button`ON`only
`Button`On`+`Off
````COMMAND
``End`of`DATA
```Note-Off
```Note`Number
Data`Val`00h```0
Data`Val`3Ch``60
````Velocity````
Data`Val`00h```0
Data`from`Slider
````COMMAND
``End`of`DATA
```Note-Off
```Note`Number
Data`Val`00h```0
27