Editing Overview - Kenton Control Freak STUDIO EDITION User Manual

EDITING THE CONTROL FREAK

Editing Overview

Defining objects to edit Moving a slider before entering edit mode will define it as the Slider to
The [< ––] and [–– >] edit buttons The [< ––] and [–– >] buttons are used to navigate through the individual
In any edit menu Pressing [STORE] will save any edits at any time.
Editing names Use the Data Wheel to select lower case letters and numbers.
Clearing data When editing slider, button or function key data, pressing [LEARN]
Abbreviations PB
8
The main editing commands are grouped together here for easy reference.
Edit.This also works with Push buttons but not the F keys.
edit pages.
Slider 16/8 operates as a second Data Wheel.
Pressing [SHIFT] whilst moving the Data Wheel will accelerate the Data
Wheel by a factor of four.
Pressing [EXIT] will return you to PLAY MODE. However, if you have made
any changes and they have not been stored, you will see the prompt:
Lose`changes?
[EXIT] or [STORE] options, or pressing the [–– >] button which will re-enter
the relevant edit pages.
Holding [SHIFT] while pressing [EXIT] will leave edit mode at any time.All
current edits will be lost, the user will not be prompted.
Use [SHIFT] + Data Wheel to select capitals and symbols.
The top left two buttons act to delete characters and insert spaces.
The left and right arrow keys act as cursor buttons.
Pressing [STORE] while holding [SHIFT] jumps directly from edit name
to edit data pages.
Editing data When editing slider, button or function key data, pressing [LEARN] will
activate the learn mode and light the Learn LED.The Freak will then be ready
to receive incoming MIDI data. Pressing [LEARN] again will allow
you to check or further edit the received MIDI data prior to [STORE].
When editing MIDI data strings, the top left two buttons act to delete and
insert bytes.
twice acts as a quick way to erase unwanted MIDI strings prior to
entering new data.
= Push button (one of the buttons above the sliders)
FK = Function key
F key = Function key
RX = Receive
R/T = Real-time
You are then given the choice between [SHIFT] +
CONTROL FREAK