DBL Technology GoIP User Manual page 9

2. The LAN port is intended for intranet or internet connection.
it can be connected various type of network equipment, such as network router, network switch / Hub,
xDSL/Cable modem, etc.
3. The PC port is intended for network sharing and it supports both bridge and router modes.
mode, the PC port is connected to the same network segment as the LAN port.
port is set to a different network segment. In this case, please make sure that the PC network segment IP
(192.168.x.) is different from the one in the LAN port network.
4. The DC port is for power connection.
different rating or vendor may damage the device or affect its performance.
5. The Reset button is recessed inside the GoIP cabinet.
reset button.
device settings including login password to its factory defaults.
http://www.dbltek.com
Press it momentarily to reboot the device.
Depending on your network environment,
Please only use the AC/DC adapter provided.
You need to use a sharp pointer to access the
Press it for 15 seconds or more to reset the
GoIP User Manual
In Bridge
In Router mode, the PC
Adapter with
8