DBL Technology GoIP User Manual page 18

4. Auto-provision
 Provision Server
 Provision Interval
5. Remote Control
 Remote Server
 Remote Server
Port
 Remote Server ID

Remote Server
Password
6. Network Tones
7. HTTP Port
8. DDNS
 DDNS Address
 DDNS Port
 Update Interval
http://www.dbltek.com
The auto provision is optional.
downloads its configuration from the Auto Provision Server at start up or at the
time interval specified by the Provision Interval.
<Serial Number>.cfg which is just a text file (not encrypted).
format is required, please contact technical support for further assistance.
Please note that Auto Provision Server is a free utility supporting both Linux and
Window environment. Please visit our website or contact technical support
for more information.
The specifies the Provision Sever address (IP or Domain name)
This specifies the interval in performing an auto provisioning event.
This is a unique feature that allows remote access to the device's built-in Web
server even when it is installed behind NAT.
Control Server is required to be installed.
utility and is available for download via our website.
support for further assistance if required.
that the Remote Server Port and Password are set properly.
This specifies the IP address or the domain of the Remote Control Server.
Check with your Remote Server administrator for the communication port.
This specifies the name to be appeared in the Remote Control Server.
reference for the device.
This specifies the login password to the Remote Control Server.
to login to the built-in webpage.
available.
Network tones are the tones associated with the traditional (PSTN) telephone
network, such as dial tone, ring back tone, busy tone, call waiting tones, etc.
These tones will only be used when the device answers an incoming call and the
call is not forwarded to a SIP server automatically.
are classified by country name.
the "Custom" selection allows users to define the network tones individually.
Please refer to Appendix B for more information.
This sets the port that is used to access the built-in web server.
port number is 80. The port range is from 1 to 65535.
This is a proprietary DDNS service offered by DBL.
identify each other via this DDNS service.
domain name of the device is its <serial number>.com.
to support peer-to-peer configuration.
The default DDNS Address is "voipddns.net" which a free service offered by DBL.
contact your vendor if you want to install your own DDNS server.
The default communication port number is 39800.
This specifies the interval between registrations to the DDNS.
When this option is enabled, the device
The configuration file name is
To achieve this function, a Remote
This server is a free Linux based
Please contact technical
Once installed, please make sure
Please ask your Remote Server Administrator if it is not
Predefined Network Tones
If the country desired is not found in the list,
It allows DBL's products to
When this service is activated, the
If encrypted
1920
It is used as a
This is not the password
The default
This feature is useful
Please voipddns.net
39800
120 (mins)
GoIP User Manual
17