Sim Forward - DBL Technology GoIP User Manual

10. Billing Increment (s)
11. SMS Alert Number
12. SMS Alert ID
13. SMS Alert Trigger
(Remain Talk Time (m))
14. Hide My GSM Number

3.3.12 SIM Forward

This section allows the user to define the GSM Call Forward settings for each channel.
Forward conditions:
1. Always - Forward all incoming calls unconditionally
2. Busy - Forward all incoming calls when busy.
3. No Answer - Forward the incoming calls when it is not answered.
4. No Service - Forward all incoming calls when the SIM cannot register to the network.
There are 3 choices for each Call Forward condition.
1. Set - This enable the Call Forward function.
starting a new registration to the network.
2. Disable - This disable the Call Forward function.
starting a new registration to the network.
3. Not Set - This leaves the current SIM Call Forward setting in the network unchanged.
sent to the network at all.
Parameter
(SIM Forward)
http://www.dbltek.com
This is a call duration measurement unit expressed in seconds. Depending
on your service provider, some services are measured and billed in sixty
second increments (one minute) or the billing increment may be in
durations of six or even ten seconds.
This specifies the GSM number to receive a SMS Alert on the Total Talk
Time. If this parameter is blank, no SMS Alert will be sent.
This parameter is used to identify the channel sending the SMS Alert.
The Remain Time is the Total Talk Time Limit minus the total talk time
used. When this Remain Time reaches the value set in the parameter, a
SMS Alert is sent to the SMS Alert Number automatically.
This parameter determines if the caller party can receive the phone
number of the caller or not.
number from the called party.
This specified if the phone number of the caller is shown at the called
party or not.
Description
Enabling this parameter hides My GSM
This setting is sent to the network whenever the SIM is
This setting is sent to the network whenever the SIM is
GoIP User Manual
There are four Call
This setting is NOT
Default Value
42