Step 6: Connect The Power - Promise Technology ULTRATRAK RM4000 Quick Start Manual

Step 6: Connect the Power

UltraTrak systems will operate on either 115 volts AC or 230 volts AC.
The RM4000 includes a replaceable power supply modules with
autosense voltage selection and Power Factor Correction (PFC).
Figure 6. UltraTrak RM4000 power connector and switch
Plug the UltraTrak and switch the power on. The power switch is located on
the back of cabinet. After a few moments the LCD should display the
following message:
The front panel interface for the UltraTrak consist of following items:
Lock
Figure 7. RM4000 Front Panel Display and Controls
Power Switch
Power Connector
No Array is defined
30°C/86°F
Liquid Crystal Display
SEL
Up Select
Down
4500RPM
EXIT
Exit
9
Quick Start Guide
Power
Status
SCSI Activity