Toro Workman MD Service Manual page 93

6. Disassemble differential case assembly.
1. Bolt (6 used)
2. Gear 62
A. Remove six (6) bolts securing gear 62 to the dif-
ferential case.
2
1. Spring pin
2. Differential case
NOTE: The spring pin can be punched out from the hole
on the opposite side of gear 62.
B. Remove spring pin from the differential case. Dis-
card pin and replace it with new spring pin.
Workman MD/MDX
1
Figure 45
3. Differential case
3 4
4
Figure 46
3. Pinion shaft
4. Pinion gear
Page 5 - - 31
2
3
1
C. Remove pinion shaft and gears from the case.
Separate gears from shaft.
Drive Train