Toro Workman MD Service Manual page 61

Drive Clutch Removal Tool (Serial Number Above 310000000)
This tool is required to remove the drive clutch from the
tapered drive shaft of the engine. It is placed in the
threaded hole of the fixed clutch sheave after the clutch
holding cap screw is removed.
Toro Part Number: TOR6013
NOTE: Vehicles with a
310000000 are equipped with a TEAM brand drive
clutch.
Drive Clutch Spider Removal Tool Kit (Serial Number Above 310000000)
This kit is required to remove the drive clutch spider from
the post of the fixed sheave. Kit includes spanner and
clutch holding bar.
Toro Part Number: TOR6016
NOTE: Vehicles with a
310000000 are equipped with a TEAM brand drive
clutch.
Workman MD/MDX
serial number above
serial number above
Page 5 - -
Figure 8.1
2
Figure 8.2
1. Holding bar
6.1 Rev. A
1
2. Spanner
Drive Train