Service And Repairs; Drive Clutch - Toro Workman MD Service Manual

Service and Repairs

Drive Clutch

14
RIGHT
FRONT
1. Engine (V- -twin shown)
2. Starter/generator
3. Starter/generator belt
4. Starter/generator pulley
5. Cap screw (4 used)
Drive Clutch Lubrication
NOTE: Lubricate drive clutch at the interval specified in
your Operator's Manual.
1. Park machine on a level surface, stop engine and re-
move key from the ignition switch. Raise and support
cargo box.
2. Remove the three (3) cap screws that secure the
cover to the drive clutch (Fig. 13). Remove the cover
from the clutch.
Drive Train
1
2
Figure 12
6. Lock washer (4 used)
7. Engine starter pulley
8. Spacer
9. Drive clutch
10. Washer
When using compressed air for cleaning the
clutch, the dust in the clutch will become airborne
and could damage your eyes or you could inhale
it causing breathing difficulties.
Wear safety goggles and a dust mask or other eye
and respiratory protection when performing this
procedure.
Page 5 - - 10
3
Loctite #242
8
4
5
6
7
9
11. Cap screw
12. Plastic cap
13. Drive belt
14. Engine tray
WARNING
13
25 to 30 ft- -lb
(34 to 40 N- -m)
v
11
10
Loctite #242
12
Workman MD/MDX