Adjustments; Adjust Parking Brake - Toro Workman MD Service Manual

Adjustments

Adjust Parking Brake

1. Pry the rubber cover off of the parking brake.
2. Loosen the set screw securing the knob to the park-
ing brake lever (Fig. 1).
3. Rotate the knob until a force from 30 to 40 lb. (133 to
177 N) is required to actuate the lever.
4. Tighten the set screw and install the rubber cover.
Chassis
2
1. Parking brake lever
2. Brake knob
Page 7 - - 6
1
3
Figure 1
3. Set screw
Workman MD/MDX