Sd Memory Card Access - Canon VB-M700F Operation Manual

SD Memory Card Access

You can set the camera so that the following data is saved automatically to the camera's SD memory card. ("Chapter 5
Setting Page", "[Memory Card] SD Memory Card Operations and Settings" (p. 5-30)).
• JPEG images when recording-mode stream transmission failed to be sent due to network errors
• JPEG images when HTTP or FTP upload failed
• Log
Access to the SD Memory Card
The SD memory card cannot be accessed by a web browser. Use the SD Card Utility (p. 1-4) or FTP software (not included)
to access the camera using the camera's IP address.
FTP Software Settings
Address: Camera IP address
User ID: Administrator user ID
Password: Administrator password (factory default setting: camera)
8
-2
(factory default setting: 192.168.100.1)
(factory default setting: root)