Canon VB-M700F Operation Manual page 96

(8) [Preset] tab, [Preset Tour] tab
Switch between the preset setting tab and preset tour
setting tab.
(9) [Preset/Home Position] selection box
Select the preset (from 1 to 20) or [home position] you
want to set.
(10)[Quick Registration]
Load the current camera position, and register them
as preset settings.
(11)[Preset Name]
You can enter a preset name of up to 64 characters.
You can set a name in alphanumeric characters. Be
sure to enter a single-byte alphanumeric preset name.
When the [Home Position] is selected in (9), the preset
name function is grayed out.
In a [Preset Name], ASCII characters (spaces or
printable characters) can be used.
(12)[Detailed Settings]
Show the detailed settings.
(12)-1 [Show in viewers] checkbox
Select this checkbox to use presets in the
viewer. When the [Home Position] is selected
in (9), this function is grayed out.
(12)-2 Camera Parameter
Enter the center angle of the desired angle in
[Pan] and [Tilt]. In [Zoom], enter the view
angle.
• Camera Angle
[Pan] .... Set the pan position of the camera.
[Tilt]...... Set the tilt position of the camera.
[Zoom] . Set the viewing angle of the
• [BLC] (Back Light Compensation)
Select [OFF] or [ON] for the BLC setting of
the camera.
• [Focus Mode]
Select [Auto], [Manual], or [Fixed at infinity]
for the focus mode of the camera. (p. 7-15)
• [Smart Shade Control]
Select [OFF] or a level from [1] (weak) to [7]
(strong) for the smart shade control setting of
the camera.
• [White Balance]
Set the white balance of the camera to [Auto]
or according to the light source of the
condition in which it is used. For details on
light sources, see p. 5-10.
• [R Gain], [B Gain]
If white balance is set to [Manual], set the
respective gains to a value between 0 and
1023.
6
-18
camera.
(13)[Get camera info]
Load the current camera angle, the (5) [Focus]
settings, or (6) [Smart Shade Control] settings of the
image display area, and reflect them in the panorama
screen or camera parameter settings.
(14)[Preview settings]
Preview the image with the camera parameter values
that are being edited in the image display area.
(15)[Clear settings]
Delete the settings for the preset selected.
(16)[Restore settings]
Clear the settings you have specified on the screen of
the tool and restore the settings saved in the camera.
(17)[Save settings]
Save the edited preset settings in the camera.
If presets have been set, be sure to save the settings
by clicking [Save settings].