Sd Memory Card Access - Canon VB-M40 Operation Manual

SD Memory Card Access

You can set the camera so that the following data is saved automatically to the camera's SD memory card. ("Chapter 4
Settings Page", "[Memory Card] SD Memory Card Operations and Settings" (P. 4-30).
• JPEG images stored when HTTP or FTP upload failed during network errors
• Log
Here is an explanation of how to access the data saved on the SD memory card.
Access to the SD Memory Card
Use FTP software (not bundled) to access the camera's IP address.
FTP Software Settings
Address: Camera IP address
User ID: Administrator user ID
Password: Administrator password (factory default setting: camera)
SD Memory Card Directory Configuration
The SD memory card is mounted as the directory name "CANON" under "/mnt/card" in the camera's internal memory.
Subdirectories are created as follows.
Camera IP address/mnt/card/CANON
7
-2
(factory default setting: 192.168.100.1)
(factory default setting: root)
/UPLOAD
/00/000.JPG
JPEG Images Stored when
Upload Fails
/99/999.JPG
/LOG
/MSG
/MSG.1
Log
/MSG.5
SD Memory Card