Canon VB-M700F Operation Manual page 133

JPEG Images Stored when Recording-Mode Stream Transmission Fails
The included SD Card Utility displays or deletes JPEG images saved on an SD memory card. It can also convert saved
images into MOV files and save them to a computer.
Important
The SD card utility can only display, delete, or convert JPEG images of stream recordings that could not be transmitted due to network errors.
FTP software can be used to download JPEG images to a computer, but you will need to use the SD Card Utility (p. 1-4) to
play back the images.
When either the storage capacity of the SD memory card or the upper limit of the number of files that can be saved is
reached, you cannot save further images to the SD memory card. If this happens, delete any unneeded JPEG images to
free up capacity on the SD memory card.
JPEG Images Stored when Uploading Fails
FTP software can be used to download the JPEG images to a computer, but the images will be still image files. The images
cannot be downloaded as files that can be played back as video.
When either the storage capacity of the SD memory card or the upper limit of the number of files that can be saved is
reached, you cannot save further images to the SD memory card. If this happens, delete any unneeded JPEG images to
free up capacity on the SD memory card.
Log Files
Log files can be downloaded to a PC using FTP software, but you can use the Log Viewer in Admin Tools as a simple way
to view and download log files.
Important
Canon will assume no liability for any accident or damage resulting from use of FTP software.
SD Memory Card Access
8
-3
8