Canon VB-M700F Operation Manual page 140

A272 Upload communication buffer overflowed
[warning]
Description ftp/http queue is full (A272)
Meaning Upload data overflowed from the
communication buffer.
Countermeasure Make adjustments to reduce the number of
event occurrences. Also adjust the image
quality, image size and frame rate for
upload.
A273 Used buffer size is over maximum size [warning]
Description used buffer size is over maximum size.
(A273)
Meaning The buffer reached maximum usage size.
Countermeasure Adjust the image quality, image size and
frame rate for upload.
A274 Event buffer for upload overflowed [warning]
Description event queue is full (A274)
Meaning Event buffer for upload overflowed.
Countermeasure Make adjustments to reduce the number of
event occurrences.
A275 Image buffer for upload overflowed [warning]
Description buffer queue is full (A275)
Meaning Image buffer for upload overflowed.
Countermeasure Make adjustments to reduce the number of
event occurrences. Also adjust the image
quality, image size and frame rate for
upload.
A470 Uploader initialization failed [crit]
Description uploader initialization failure - %1 (A470)
%1 Error number
Meaning The uploader could not be initialized.
Countermeasure If the problem persists after rebooting the
camera, the camera is faulty, arrange for
servicing.
Application (audio server) messages
B001 Starting and shutdown of audio server [info]
Description %1 audio. (B001)
%1 starting | stopping
Meaning The audio server was started/shut down.
8
-10
B011 Audio client connected [info]
Description [%1] %2 connected n=%3 (B011)
%1 Client type (send | recv)
%2 Client host IP address
%3 Total number of clients
Meaning An audio client was connected.
B012 Audio client closed [info]
Description [%1] %2 closed n= %3 (B012)
%1 Client type (send | recv)
%2 Client host IP address
%3 Total number of clients
Meaning An audio client was disconnected.
B101 Error request received [notice]
Description %1 unusual request [%2] (B101)
%1 Client host IP address
%2 Error type (400 | 404 | ...)
Meaning The request was denied due to a command
error (400) or parameter error (404).
B102 Client connection denied [notice]
Description %1 request denied [%2] (B102)
%1 Client host IP address
%2 Denial type (41 | 43 | ...)
Meaning Client connection was denied due to an
authentication error (41), time specification
error (42), insufficient resource (43),
specification of unsupported codec (45),
specification of unpermitted user level (47),
too many clients (49) or invalid operation
mode (4a).
Countermeasure 41: Check user name, password or user list
used when connecting. 42: Check playtime
or maximum connection time settings used
when connecting. 43: Reconnect or restart.
45: Use supported client software. 47:
Check user level used when connecting. 49:
Check client number settings. 4a: Check if
usage of audio server is enabled.
B103 Client forcibly disconnected [notice]
Description %1 access denied [%2] (B103)
%1 Client host IP address
%2 Denial type (41 | 42 | 4a)
Meaning Connection was initially permitted, but the setting
has subsequently been changed to prohibit
access, thereby triggering a forced disconnection
(the denial type is the same with B102).