Canon VB-M700F Operation Manual page 144

S240 Camera error [warning]
Description serviceman call (S240)
Meaning A camera error occurred.
Countermeasure Camera needs to be serviced.
S250 PAN/TILT error [warning] (VB-M40)
Description serviceman call (S250)
Meaning An error occurred in the PAN/TILT area.
Countermeasure Camera needs to be serviced.
S306 Error on saving settings [err]
Description Can't update system settings (S306)
Meaning An error generated while the system was
saving setting. Setting could not be saved.
Countermeasure Provide enough memory space by deleting
unnecessary files in the user memory area,
etc.
S307 Error on saving settings [err]
Description (vbadmin.c XXX) Can't update system
settings (S307)
Meaning An error generated while the settings were
saved by the setup protocol. Setting could
not be saved.
Countermeasure Provide enough memory space by deleting
unnecessary files in the user memory area, etc.
S310 Working error in event service [err]
Description cannot work event [%1] [%2] [%3] (S310)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An error occurred while the event service
was running.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
S311 Working error in external input/output service
[err]
Description cannot work extio [%1] [%2] [%3] (S311)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An error occurred while the external input/
output device service was running.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
8
-14
S312 Working error in timer service [err]
Description cannot work timer [%1] [%2] [%3] (S312)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An internal error occurred in the timer service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
S320 PAN/TILT operation error [err] (VB-M40)
Description %1 error occurred. [%2] (S320)
%1 PAN | TILT
%2 Warning details
Meaning An error occurred during operation or
stopping of PAN/TILT.
Countermeasure Check that the camera is not touching the
dome, etc.
If the error is not caused by problems such
as contact with peripheral items, the camera
needs to be serviced.
S410 Event service initialization error [crit]
Description event initialization error [%1] [%2] (S410)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
event service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
S411 External input/output service initialization error
[crit]
Description extio initialization error [%1] [%2] (S411)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
external input/output device service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.