[Maintenance] Viewing Event Logs And Current Settings And Performing Maintenance - Canon VB-M700F Operation Manual

[Maintenance]
Viewing Event Logs and Current Settings and Performing Maintenance
The following items can be used here.
• Tool
Display or Initialize Camera Settings
Tool
(1) [View Logs]
Display a history of camera operations and
connections to each viewer, etc.
(2) [View Current Settings]
Display a list of current settings.
(3) [Reboot]
The camera is rebooted.
(4) [Restore Settings]
Discard user-defined settings and restore all setting
items to factory default settings except camera
administrator password, network setting, date, time,
time zone, SSL certificate and encrypted
communications. Executing this operation will reboot
the camera automatically.
Caution
• You must not turn off the camera while it is
performing the [Restore Settings] operation.
Turning off the camera at this stage may result in
making it unable to boot correctly.
• Never touch the camera head during
initialization. Initialization failure or malfunction
may result.
Note
• It is recommended that you write down all current setting
values before restoring factory default settings in [Restore
Settings] (p. 8-20).
• The camera can be restored to factory default settings using
the reset switch as well. Note, however, that this will reset all
camera settings to factory default settings except for date and
time (p. 8-19).
5
5
-33