Sd Memory Card Access - Canon VB-H610D Operation Manual

SD Memory Card Access

You can set the camera so that the following data is saved automatically to the camera's SD memory card. ("Chapter 5
Setting Page", "[Memory Card] SD Memory Card Operations and Settings" (p. 73)).
• Image files when recording-mode stream transmission failed to be sent due to network errors (JPEG only)
• Video files when HTTP or FTP upload failed due to network errors (JPEG/H.264)
• Video files manually recorded by the user from the Admin Viewer (JPEG/H.264)
• Video files recorded by [External Device Input], [Volume Detection], and the intelligent functions when an event occurs
(JPEG/H.264)
• Video files recorded using a timer (JPEG/H.264)
• Log
Access to the SD Memory Card
Use the Recorded Video Utility (p. 116) of the Admin Tools or FTP software (not included) to access the camera using the
camera's IP address.
FTP Software Settings
Address: Camera IP address
User ID: Administrator user ID
Password: Administrator password (factory default setting: camera)
JPEG Images Stored when Recording-Mode Stream Transmission Fails
When either the storage capacity of the SD memory card or the number of files that can be saved in all subdirectories is
reached, you cannot save further images to the SD memory card. If this happens, delete any unneeded JPEG images with
the Recorded Video Utility.
JPEG/H.264 Video Stored when Uploading Fails
When either the storage capacity of the SD memory card or the number of files that can be saved in all subdirectories is
reached, you cannot save further video files to the SD memory card. If this happens, delete any unneeded JPEG/H.264
video files with the Recorded Video Utility.
Video Manually Recorded by the User (JPEG/H.264)
When either the storage capacity of the SD memory card or the number of files that can be saved in all subdirectories is
reached, you cannot save further video files to the SD memory card. If this happens, delete any unneeded JPEG/H.264
video files with the Recorded Video Utility.
Video Recorded When an Event Occurs (JPEG/H.264)
When the storage capacity of the SD memory card is reached, you cannot save further video files to the SD memory card. If
this happens, delete any unneeded JPEG/H.264 video files with the Recorded Video Utility to free up capacity on the SD
memory card.
Video Recorded Using a Timer (JPEG/H.264)
When the storage capacity of the SD memory card is reached, you cannot save further video files to the SD memory card. If
this happens, delete any unneeded JPEG/H.264 video files with the Recorded Video Utility to free up capacity on the SD
memory card.
144
(factory default setting: 192.168.100.1)
(factory default setting: root)