To Scan During Warm-Up - Konica Minolta bizhub 750 Copy Manual

2

To scan during warm-up

1
Turn on the sub power switch.
The indicator on the [Start] key lights up in orange.
? How is the machine turned on?
% For details on turning on the machine, refer to "To turn on the ma-
chine" on page 2-22.
2
Check that the message "Now warming up. Ready to scan." appears
on the touch panel.
– After the warm-up message is displayed, the Basic screen appears.
The indicator on the [Start] key lights up in green.
3
Specify any necessary copy settings.
4
Using the keypad, specify the desired number of copies.
? How is the number of copies specified?
% For details on specifying the number of copies, refer to "General
Copy Operation" on page 3-2.
2-24
Before Making Copies
bizhub 750/600