Konica Minolta bizhub 750 Copy Manual page 444

Utility
Parameter
Scanner
Adjust-
ment
ADF Centering
!
Detail
When PK-505 and ZU-602 are installed, adjustments can be made using
both the "Punch Adjustment" and "Z-Fold Position Adjustment" param-
eters. Contact your technical representative.
List/Counter
Parameter
Management List
Paper Size/Type Counter
LCD Backlight Setting
Description
Adjust the brightness of the touch panel back-
light to one of 16 levels.
Standard Size Setting
Parameter
Original Glass Original Size Detect
ADF Original Size Detect
bizhub 750/600
Description
Leading The starting scanning position (document feed direction) of the doc-
Edge Ad- ument can be adjusted. For details on making this adjustment, con-
justment tact your technical representative.
Centering The starting scanning position (transverse document feed direction)
of the document can be adjusted. For details on making this adjust-
ment, contact your technical representative.
Vertical If the copy image is distorted (stretched or compressed), the zoom
Adjust- ratio in the document feed direction for the scanner can be adjusted.
ment For details on making this adjustment, contact your technical repre-
sentative.
If the center position cannot be automatically adjusted in the trans-
verse document feed direction, it can be adjusted manually. For de-
tails on making this adjustment, contact your technical
representative.
Job Settings List
Description
Specify the paper standards for
detecting paper from the original
glass.
Specify the paper standards for
detecting paper in the ADF.
Settings (Default set-
tings are underlined.)
Description
The machine settings can be printed.
Store up to 9 combinations of paper sizes
and paper types to be counted.
Settings (Default settings are underlined.)
1 to 16: 8
Settings (Default
settings are under-
lined.)
AB series/ Inch series/
A series/ Full size
12
12-31