Konica Minolta bizhub 750 Copy Manual page 187

4
6
Touch [OK] or [Cancel].
– To return to the Basic screen, press the [Mode Memory] key.
!
Detail
Copy programs cannot be changed.
If the "Saved Job Settings Access" or "Lock Settings" parameters have
been set for a registered copy program, [Edit Name] and [Del.] do not ap-
pear. For details, refer to "System Setting" on page 12-26.
To stop registering the program, press the [Reset] key or the [Mode Mem-
ory] key.
No matter which screen is displayed, the registration is cancelled.
Otherwise, continue to touch [Cancel] until the Basic screen is displayed.
4-12
Additional Copy Operations
bizhub 750/600