Konica Minolta bizhub 750 Copy Manual page 323

8
– When using the keypad to specify the settings, press the [C] (clear)
key, and then type in the setting.
If a value outside the allowable range is specified, the message "In-
put Error" appears. If "Input Error" appeared or if the distance was
incorrectly entered, press the [C] (clear) key to erase the value, and
then specify the correct value.
– To specify no distance, touch [No Shift].
11
Touch [OK].
If the distance between repeats was specified, the Repeat screen ap-
pears again.
12
Touch [OK] three times.
13
In the Basic screen, touch [Paper], and then select the paper tray load-
ed with the paper.
14
If necessary, specify any other copy settings.
15
Using the keypad, type in the desired number of copies.
16
Press the [Start] key.
8-50
Application Functions
bizhub 750/600