Konica Minolta bizhub 750 Copy Manual page 345

8
– If a decimal value is displayed in the screen, press the [C] (clear)
key, and then use the keypad to type in the setting. For details on
switching between decimal and fraction values, refer to "System
Setting" on page 12-14.
If a value outside the allowable range is specified, the message "In-
put Error" appears. If "Input Error" appeared or if the distance was
incorrectly entered, press the [C] (clear) key to erase the value, and
then specify the correct value.
7
Touch [OK], and then touch [OK] in the next screen that appears.
8
If necessary, specify any other copy settings.
9
Using the keypad, type in the desired number of copies.
10
Press the [Start] key.
8-72
Application Functions
bizhub 750/600