Konica Minolta bizhub 750 Copy Manual page 378

Replacing Toner Cartridges and Staples and Emptying Dust Boxes
5
Load the new cartridge
case into the staple car-
tridge.
– Align the side of the
staple cartridge
marked by the arrow
with the side of the
cartridge case
marked by the arrow,
and then fully insert
the staple cartridge.
– Carefully pull the seal
off the cartridge
case.
6
Install the staple cartridge.
– Place the staple car-
tridge on the rails,
and then guide it
back to its original
position.
– Push down the sta-
ple cartridge, and
then check that the
cartridge is securely
installed.
bizhub 750/600
9
2
1
9-13