Adjusting The Half-Fold Position - Konica Minolta bizhub 750 Copy Manual

Utility
Note
Enter the value by mm using the keypad. Refer to the conversion rate be-
low. 1 in. = 25.4 mm

Adjusting the Half-Fold Position

The half-fold position when printing with the "Fold & Staple" function can be
adjusted.
0 Use the "Fold & Staple" function to print a single sample copy, and then
perform the adjustment while checking the sample that was created.
1
Display the Administrator Setting screen.
– For details on displaying the Administrator Setting screen, refer to
"Displaying the Administrator Setting Screen" on page 12-39.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [5 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [2 Half-Fold Position].
The Half-Fold Position screen appears.
6
Touch the button for the paper size to be set.
7
Touch [Test Copy].
The Test Copy screen appears.
bizhub 750/600
12
12-47