Konica Minolta bizhub 750 Copy Manual page 344

Application Functions
4
Touch [Erase].
The Erase screen appears.
5
Specify the area to be erased.
– To erase the same width along all four sides of the original, touch
[Frame].
– To specify a different width to be erased depending on the position,
specify different settings for "Top", "Left", "Right", and "Bottom".
– To cancel changes to the settings, touch [Cancel].
– To cancel the "Erase" function, touch [OFF].
? What happens when [Frame] is selected?
% The same width is erased on all four sides of the original. The fac-
tory default setting is "Frame". If "Frame" is selected, the same
width is erased on all four sides of the original.
? Can the settings be combined?
% "Frame" cannot be combined with the other settings ("Top", "Left",
"Right" or "Bottom").
6
Touch [-] and [+] or use the keypad to specify the width to be erased.
– To specify that no part of a side is to be erased, touch [None].
– Touch [↔] to switch between the integer and the fraction, touch[–]
and [+] to specify the width to be erased, and then touch [OK].
bizhub 750/600
8
8-71