Konica Minolta bizhub 750 Copy Manual page 459

12
7
Touch [Test Copy].
The Test Copy screen appears.
8
Press the [Start] key.
The sample copy is printed.
9
Touch [Close].
The Center Staple Position screen appears again.
10
Compare the width of the left pages of the copy sample with the width
of the right pages to check for the center of the paper.
11
If the desire print results
are not achieved,
change the adjustment
value.
– If the staple position
is too far to the right
of the center of the
paper, touch [+] (be-
tween 0.1 mm and
12.7 mm).
– If the staple position
is too far to the left of
the center of the pa-
per, touch [–] (be-
tween 0.1 mm and
12.8 mm).
– To scroll through the
values quickly, touch
[+] or [–] continuous-
ly.
12
Repeat steps 6 through 11 until the desired print results are achieved.
13
Touch [OK].
– To cancel changes to the settings, touch [Cancel] .
12-46
Utility
bizhub 750/600