12
Initial Setting
Description
Specify the default settings for Copy mode.
The copy settings selected when the machine is turned on (the pow-
er switch is set to "n") or the [Reset] key is pressed can be specified.
• Current Setting:
The settings specified from the touch panel before Utility mode
was entered are set as the default settings for Copy mode.
• Factory Default:
The factory default settings are set as the default settings for
Copy mode.
Reminder
To change the default settings for Scan mode , press the [Scan] key, en-
ter Utility mode, and then select a setting for this parameter.
!
Detail
For details on the default settings and the factory default settings, refer
to "Automatically Canceling the Settings (Automatic Panel Reset)" on
page 2-27.
12-20
Utility
Settings (Default set-
tings are underlined.)
Current Setting/ Factory
Default
bizhub 750/600