When the Pneutorque
and must be allowed to rest squarely against a solid object or surface adjacent to the fastener to be
tightened. See figure 3(a), 3(b), 3(c) and 3(d).
®
Pneutorque
Model
Example of PTM
tool.
Example of PTM
tool with nose
extension option
or PTME tool.
WARNING:
Clockwise / Counter-Clockwise
Set clockwise / counter-clockwise as required.
NOTE:
This setting only applies to bi-directional tools.
WARNING:
10
®
is running the reaction bar rotates in the opposite direction to the output drive square
Clockwise
FIGURE 3(a)
FIGURE 3(c)
ALWAYS KEEP HANDS CLEAR OF THE REACTION BAR WHEN
THE TOOL IS IN USE OR SERIOUS INJURY MAY RESULT.
FIGURE 4(a) – Clockwise
(Arrow towards drive square
FAILURE TO FULLY ENGAGE THE CLOCKWISE / COUNTER- CLOCKWISE
SELECTOR WILL RESULT IN DAMAGE TO THE GEARBOX.
Torque Reaction
FIGURE 4(b) – Counter-Clockwise
(Arrow away from drive square)
)
Counter-Clockwise
(Bi Directional Tools Only)
FIGURE 3(b)
FIGURE 3(d)