Lighten/Darken (Adjusting The Copy Density); Pages Per Side (Copying Two Pages Onto One Sheet); Staple - Fuji Xerox ApeosPort-IV C7780 User Manual

3 Copy

Lighten/Darken (Adjusting the Copy Density)

This feature allows you to select a copy-density level from seven levels. The copy
becomes darker when you move [
right.
1
Use [

2 Pages per Side (Copying Two Pages onto One Sheet)

This feature allows you to copy two pages of a document together onto a single sheet
of paper.
3
When you select [2 Pages per Side], [Auto %] is automatically selected in [Reduce/
Enlarge]. The machine automatically sets the copy ratio and makes copies of the
images so that they fit on the selected paper.
Note
For information on how to copy four or eight pages of a document together onto a single sheet of paper,
refer to "Pages per Side (Copying Multiple Pages onto One Sheet)" (P.125).
1
Select [2 Pages per Side].

1 Staple

This feature allows you to select whether to staple copied outputs at the top left corner.
The number of sheets that can be stapled is 2 - 50 (when 80 gsm paper is used) with
Finisher C2 or Finisher C2 with Booklet Maker, and 2 - 100 (when 80 gsm paper is
used) with Finisher D2-P with Booklet Maker. Available paper types are as follows.
82
] and [ ] to set the density level.
• When you deselect [Auto %] in [Reduce/Enlarge] (when you select another copy ratio),
image loss may occur depending on the image size of the document.
• Select a tray other than [Auto Select] in [Paper Supply]. When you select [Auto Select], the
tray containing A4 paper is selected. If no tray contains A4 paper, the machine select a tray
based on the [Auto Paper Off] setting. For information on [Auto Paper Off], refer to "5 Tools"
> "Copy Service Settings" > "Copy Control" > "Auto Paper Off" in the Administrator Guide.
] to the left, and lighter when you move it to the