Steering/Frame; Steering Post/Handlebar/Tie Rods - Arctic Cat DVX 90 2010 Service Manual

FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983

Steering/Frame

NOTE: Critical torque specifications are located
in Section 1.
The following steering components should be
inspected periodically to ensure safe and proper opera-
tion.
A. Handlebar grips worn, broken, or loose.
B. Handlebar bent, cracked, and an equal and
complete full-left and full-right turn capability.
C. Steering post bearing assembly/bearing housing
broken, worn, or binding.
D. Ball joints worn, cracked, or damaged.
E. Tie rods bent or cracked.
F. Knuckles worn, cracked, or damaged.
G. Cotter pins damaged or missing.
The frame and welds should be checked periodically
for damage, bends, cracks, deterioration, broken com-
ponents, and missing components.
Steering Post/
Handlebar/Tie Rods
REMOVING
1. Remove the seat.
2. Remove the control cables from the handlebar;
then route them through the metal loop on the
steering post and out of the way.
www.mymowerparts.com
8-2
MD2415
Back to TOC
3. Remove the handlebar.
4. Disconnect the handlebar switch assembly and brake
switch connectors; then route them through the
metal loop on the steering post and out of the way.
5. Remove the cap screws securing the body panel.
On the Utility, remove the front and rear racks.
Back to Section TOC
MD2430
MD2431
MD2139
MD2416
Next