Date And Time Are Incorrect; Automatic 2-Sided Printing Problems - Xerox ColorQube 8580 User Manual

Date and Time are Incorrect

Probable Causes
The correct date and time are not set.
See also:
Setting the Date and Time

Automatic 2-Sided Printing Problems

Probable Causes
There is a setting mismatch between the
printer control panel and the print driver. The
printer is set to 2-sided printing at the control
panel but the job that was sent did not
specify 2-sided printing in the print driver.
The correct paper size and type are not
selected at the control panel.
Unsupported or incorrect paper.
Your printer model is not configured with
automatic 2-sided printing.
Solutions
To set the printer date and time, at the control panel, navigate to
Printer Setup>Printer Controls>Date and Time.
on page 32
Solutions
Select 2-sided printing in the print driver before you print the job.
For details, see
1. Remove the paper from the paper tray.
2. Load paper into the tray, then insert it back into the printer.
3. Adjust the width guides until they touch the edges of the paper.
4. Ensure that the paper type is set properly in the driver and at the
printer control panel.
For details, see
• Ensure that you are using the correct paper. For details, see
Supported Paper
• Do not use unsupported paper, media, or paper heavier than
120 g/m² for automatic 2-sided printing. For details, see
Supported Paper Types and Weights for Automatic 2-Sided
Printing
Use manual 2-sided printing to print the job.
For details, see
Using Manual 2-Sided Printing
Printing on Both Sides of the Paper
Loading Paper on page 53.
on page 46.
on page 49.
Options and Upgrades
on page 90.
®
Xerox ColorQube 8580/8880 Color Printer
Troubleshooting
on page 89.
on page 23. For details, see
133
User Guide