Xerox ColorQube 8580 User Manual page 109

b. Inside the printer, to the right of the gray pick roller assembly, locate the orange release lever.
To release the roller assembly, pull the release lever toward you.
Note: Remember the position of the roller assembly for reinstallation.
c. Grasp and pull the pick roller assembly straight down to remove it from the printer.
d. To clean the pick roller, lay a strip of clear packing tape on a table, sticky side up. Run the pick
roller assembly along the length of the tape.
Note: Do not use masking tape or duct tape because they can leave residue on the roller.
®
Xerox ColorQube 8580/8880 Color Printer
Maintenance
109
User Guide