Printer Is Making Unusual Noises; The Date And Time Are Incorrect; Duplex Problems; Front Door Will Not Close - Xerox Phaser 7500DN User Manual

Troubleshooting

Printer Is Making Unusual Noises

Probable Causes
The printer is not level.
The tray is not installed correctly.
There is an obstruction or debris inside the printer.

The Date and Time Are Incorrect

Probable Causes
Did you set the correct date and time?

Duplex Problems

Probable Causes
Media or settings are not correct.

Front Door Will Not Close

Probable Causes
One or more of the consumables are missing or
installed incorrectly.
The imaging unit door latch is not rotated all the way
to the right.
110 Phaser 7500 Color Printer
User Guide
Solutions
Place the printer on a flat, hard, level surface.
Open and close the tray you are printing from.
Turn off the printer and remove the obstruction or
debris. If you cannot remove it, contact Technical
Support.
Solutions
Ensure you have set the correct Date and Time on
the control panel.
Solutions
Make sure that you are using correct media. For more
information see Supported Media
duplex envelopes, labels, heavyweight stock, or
transparencies.
Solutions
Check the toner cartridges, imaging units and waste
cartridge for correct installation.
Make sure to the latch is rotated all the way to the
right.
on page 55. Do not