Xerox ColorQube 8580 User Manual page 52

Paper and Media
To set the Tray 2 mode:
1. At the printer control panel, use the arrows to navigate to Paper Tray Setup, then press OK.
Navigate to Tray 2 Mode, then press OK.
2.
3. Navigate to the desired mode, then press OK.
Tray Mode
Static
Dynamic
Permanent
®
52 Xerox ColorQube 8580/8880 Color Printer
User Guide
Description
The current paper type and size are in effect until you change them at the printer
control panel.
The first print job that uses tray 1 after paper is loaded sets the paper size and type.
The printer changes the paper size and type only when you modify the settings at the
printer control panel.