Edit Log On Usb Storage Setting - ZyXEL Communications ZyWALL 1100 User Manual

Table 290 Configuration > Log & Report > Log Setting > Edit (System Log) (continued)
LABEL
E-mail Server 1
E-mail Server 2
Log Consolidation
Active
Log Consolidation
Interval
OK
Cancel

35.3.3 Edit Log on USB Storage Setting

The Edit Log on USB Storage Setting screen controls the detailed settings for saving logs to a
connected USB storage device. Go to the Log Setting Summary screen (see
page 658), and click the USB storage Edit icon.
Chapter 35 Log and Report
DESCRIPTION
Select whether each category of events should be included in the log messages when
it is e-mailed (green check mark) and/or in alerts (red exclamation point) for the e-
mail settings specified in E-Mail Server 1. The ZyWALL/USG does not e-mail
debugging information, even if it is recorded in the System log.
Select whether each category of events should be included in log messages when it is
e-mailed (green check mark) and/or in alerts (red exclamation point) for the e-mail
settings specified in E-Mail Server 2. The ZyWALL/USG does not e-mail debugging
information, even if it is recorded in the System log.
Select this to activate log consolidation. Log consolidation aggregates multiple log
messages that arrive within the specified Log Consolidation Interval. In the View
Log tab, the text "[count=x]", where x is the number of original log messages, is
appended at the end of the Message field, when multiple log messages were
aggregated.
Type how often, in seconds, to consolidate log information. If the same log message
appears multiple times, it is aggregated into one log message with the text
"[count=x]", where x is the number of original log messages, appended at the end of
the Message field.
Click this to save your changes and return to the previous screen.
Click this to return to the previous screen without saving your changes.
ZyWALL/USG Series User's Guide
664
Section 35.3.1 on