Set Up The Usb System Settings; Set Up The Usb Log Storage - ZyXEL Communications ZyWALL 110 Handbook & Instructions

www.zyxel.com

Set Up the USB System Settings

Go to CONFIGURATION > System > USB Storage > Settings > General. Select Activate
USB storage service if you want to use the connected USB device(s).
Set a number and select a unit (MB or %) to have the ZyWALL/USG send a warning
message when the remaining USB storage space is less than the value you set here.
Figure 286 CONFIGURATION > System > USB Storage > Settings > General

Set Up the USB Log Storage

Go to CONFIGURATION > Log & Report > Log Settings, select USB Storage and click
Activate. Click Apply to save your changes.
Figure 287 CONFIGURATION > Log & Report > Log Settings
192/255