ZyXEL Communications ZyWALL 1100 User Manual page 589

Figure 396 Configuration > Object > Certificate > My Certificates > Add
The following table describes the labels in this screen.
Table 253 Configuration > Object > Certificate > My Certificates > Add
LABEL DESCRIPTION
Name Type a name to identify this certificate. You can use up to 31 alphanumeric and
;'~!@#$%^&()_+[]{}',.=- characters.
Subject Information Use these fields to record information that identifies the owner of the certificate. You
do not have to fill in every field, although you must specify a Host IP Address, Host
IPv6 Address, Host Domain Name, or E-Mail. The certification authority may add
fields (such as a serial number) to the subject information when it issues a certificate.
It is recommended that each certificate have unique subject information.
Select a radio button to identify the certificate's owner by IP address, domain name or
e-mail address. Type the IP address (in dotted decimal notation), domain name or e-
mail address in the field provided. The domain name or e-mail address is for
identification purposes only and can be any string.
A domain name can be up to 255 characters. You can use alphanumeric characters,
the hyphen and periods.
An e-mail address can be up to 63 characters. You can use alphanumeric characters,
the hyphen, the @ symbol, periods and the underscore.
Organizational Unit Identify the organizational unit or department to which the certificate owner belongs.
You can use up to 31 characters. You can use alphanumeric characters, the hyphen
and the underscore.
Chapter 33 Object
ZyWALL/USG Series User's Guide
589