ZyXEL Communications ZyWALL 1100 User Manual page 566

The following table describes the labels in this screen. See
information as well.
Table 239 Configuration > Object > Service > Service Group
LABEL
Add
Edit
Remove
Object
References
#
Family
Name
Description
Reference
33.6.3.1 The Service Group Add/Edit Screen
The Service Group Add/Edit screen allows you to create a new service group or edit an existing
one. To access this screen, go to the Service Group screen (see
click either the Add icon or an Edit icon.
Figure 377 Configuration > Object > Service > Service Group > Edit
Chapter 33 Object
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
Select an entry and click Object References to open a screen that shows which settings
use the entry.
This field is a sequential value, and it is not associated with a specific service group.
This field displays the Server Group supported type, which is according to your
configurations in the Service Group Add/Edit screen.
There are 3 types of families:
• : Supports IPv4 only
• : Supports IPv6 only
• : Supports both IPv4 and IPv6
This field displays the name of each service group.
By default, the ZyWALL/USG uses services starting with "Default_Allow_" in the security
policies to allow certain services to connect to the ZyWALL/USG.
This field displays the description of each service group, if any.
This displays the number of times an object reference is used in a profile.
ZyWALL/USG Series User's Guide
Section 33.6.3.1 on page 566
566
Section 33.6.3 on page
for more
565), and